moeller.com.au Contact Search Sitemap 

 
 

Australian Catalogue

CAD Blocks

Marechal

PDF Catalogues


AWA Installation Instructions

Moeller Wiring Manual

Downloads

FAQs
   

Home > Support > FAQs
 
       
Search:
Find: or and Suche  

Note: All links below take you to our German site, if you want to navigate back to the Australian site, use the Back button on your browser.
 
30 entries found.
 

Is the NG31 still available or is there a similar substitute ?

 
  • A substitute can be obtained directly from the company Hubert Schröter. Click the question to obtain information.

How can you implement a connection between an EPC335 card and a PS4?

 
  • Use the KPG3-PS3 cable. Order No.: 014487

How can you map a larger number of I/O to the marker range ?

 
  • Use the

Can I use the PS416-CPU in the PS316 rack with its I/O cards ?

 
  • Neither the rack nor the I/O-cards of the PS316 series can be used.

What is necessary to actuate a contactor coil as an emergency measure when the PLC malfunctions ?

 
  • Decoupling via a protective diode

How can you prepare your own Suconet K/K1 cable ?

 
  • Use LT309.096 cable and connector S1-PS3.

How can PLCs be provided with serial interfaces ?

 
  • The ZB4-501-UM3 and ZB4-501-UM4 interface converters can be used for this purpose

How can closed-loop control tasks be implemented with the PS4/PS416 PLC systems ?

 
  • There are two application modules with two-point controllers, three-point controllers, PID controllers and there is a closed-loop control toolbox for complex closed-loop control.

How can the PS4/PS416 system receive and evaluate the DCF77 radio time signal ?

 
  • A DCF77 receiver is required for receiving the DCF77 radio time signals and a software is required for evaluating the signal.

Is it possible to carry out remote diagnostics for the PS4/PS416 system ?

 
  • Remote diagnostics can be carried out using a modem connection between the programming device and the PLC.

Is it possible to run a Suconet K2 line with the PS416 ?

 
  • The PS416-NET-210 Suconet K1/K2 card and the S40-AM-K2-D/GB application module are required for running Suconet K2 with the PS416.

Can the Sucom_A functionblock be used on the PS4-... MM1 in order to program the PLC with Sucosoft S40 ?

 
  • No

How can PS4/PS416 systems be networked with PROFIBUS-FMS?

 
  • Different modules/cards are available for networking PS4/PS416 systems with PROFIBUS-FMS. Click the question to obtain further information.

How can the PS416 networked with PROFIBUS-PA?

 
  • The PS416 can be networked with PROFIBUS-PA using a segment coupler.

How are PS416 systems networked using the PS416-NET-400 Suconet K network card?

 
  • Click the question above to obtain a description of the networking of PS416 systems.

Can the CoBox also be run on the Suconet (RS485) interface?

 
  • On the PS4-341-MM1 the CoBox can also be run directly on the Suconet interface if the SucomA function block is called in Transparent mode.

Can the PS4/PS416 communicate via Ethernet ?

 
  • For the communication with Ethernet is the network-module ″COBOX″ available.

Which PS416 cards can be used in the PS316 ?

 
  • The following PS416 cards were tested and released for the PS316 series:
    PS416-INP-400, PS416-INP-401
    PS416-OUT-400, PS416-OUT-401

Which PLC types can be connected to the S40-OPC-Server as clients ?

 
  • PS4-141/-151/-201/-271/-341-MM1as well as the PS416

Which connection interfaces are possible for connection between the PC (S40-OPC-Server) and PLC (Clients) ?

 
  • Click the question to obtain further information.

How can the analog values of the potentiometers on PS4 controllers be converted to TIME type variables?

 
  • Click the question to obtain further information.

What is the application module required for data exchange between the PS40 controller via Ethernet?

 
  • The application module is: S40-AM-K5-GB, to download please click on the question.

What hardware (PLC) can be used with the Positioning Toolbox ?

 
  • PS4-341-MM1 and PS416

Where are the version lists for Moeller PS4/PS416, EM4, LE4, Sucosoft and MI4/MV4 ?

 
  • With clicks the question you reach the current version lists.

What is the application module for Ethernet data coupling with the
PS4-150/-200/-341 and PS416 ?

 
  • Yes, the application module S40-AM-K5-GB. With clicks the question to download.

What has to be observed when a PS416-MEM-442 or PS416-MEM-443 memory module is ordered ?

 
  • See answer!

What should be done when the data exchange between the central cards of a PS416 and the CPU from S40 version 4.12 is not consistent (data from different cycles) ?

 
  • You need the new operation system OS 416M_410.

Is there an update for the closed-loop control toolbox ?

 
  • Yes, please click on the question to reach the download.

How do you declare a function block in S40 as retentive ?

 
  • Please click on the question to obtain further information.

Can a PS4 or PS416 program be SAVED/RESTORED (packed/unpacked) ?

 
  • Yes, with the function: SAVE in the S40 navigator.

 

 

 
.
 
 

 

 


Privacy Policy © 2007 by Moeller GmbH   Top