moeller.com.au Contact Search Sitemap 

 
 

Australian Catalogue

CAD Blocks

Marechal

PDF Catalogues


AWA Installation Instructions

Moeller Wiring Manual

Downloads

FAQs
   

Home > Support > FAQs
 
       
Search:
Find: or and Suche  

Note: All links below take you to our German site, if you want to navigate back to the Australian site, use the Back button on your browser.
 
77 entries found.
 

What do I need to take into account when directly selecting setpoint values with MI4 units ?

 
  • Information on this can be obtained by clicking the question.

How do you enter Configuration mode on MI4 units if the ENTER key has been assigned a macro ?

 
  • By means of special operations during the power-up

How can I connect up an MI4 or MV4 unit via Sucosoft S30 ?

 
  • Use the S30-AM-I40 application modu

What settings are required to connect an MI4 to a PS4-341 via Suconet K ?

 
  • a) Check MI4 configuration
    b) Check PLC Topology Configurator

As take is the MV4 coupling to a Mitsubushi A series PLC ?

 
  • With the communications module AJ71C24

What is with the communication between a MV4 and a Siemens PLC, to heed ?

 
  • Attention: The Bytes are reversed.

Is it possible to set the panel brightness of the MI4-471-TC1 touch panel ?

 
  • Unfortunately not with this type !

Is it possible to expand the memory of a MI4-471-TC1 Touch Panel
with a 2 or 4 MByte memory ZB4-902-SF1 or ZB4904-SF1?

 
  • Yes

Why is the MV4-Configurator only available with the type MV4-CFG-1 ?

 
  • MV4-CFG-1-GB

Which available MV4-devices are not listed in Main Catalogue ?

 
  • Typen: MV4-590-TA1 und /TA2 und /-XX1

Which touch panels are available in stainless steel?

 
  • MV4 Touch panels.

Is it possible to implement an MV4 interface via Device Net ?

 
  • Yes, with MV4 configurator MV4-CFG-1 since version 3.12.4 and a communication card ZB4-606-IF1.

What should be done if the write protection in the MV4 standard recipe management function cannot be removed ?

 
  • Only possible with MV4 configurator MV4-CFG-1 from version 3.12.

How can a message be printed out on MI4 display and operator systems?

 
  • Information on this is provided in an application note that can be obtained free-of-charge from the Internet.

How can an MI4 operator panel be connected to a Siemens S7 PLC?

 
  • An MI4 operator panel can be connected to a Siemens S7 PLC via MPI.

How can an MV4 touch panel be connected to a Siemens S7 PLC?

 
  • An MV4 touch panel can be connected to a Siemens S7 PLC using PROFIBUS-DP.

What are the chemical substances that the front of the MV4 touch operator panel is resistant to?

 
  • Click the question to obtain information on the chemical resistance of the MV4 front panel.

Is it possible to synchronize the time between several MI4 display and operator units?

 
  • Yes! This is described in an application note that is available from the Internet.

Is there any presentation material for the MI4-display and operating units ?

 
  • Yes

Is the software for configuring MI4 display and control devices compatible to Windows 2000 and Windows NT?

 
  • Yes, from version 2.01

What is the meaning of the flashing DEF-Dirty LED on the MV4 ?

 
  • When this LED is flashing, either the IR frame is slightly dirty or an IR sensor has failed. The flashing LED is only a warning.

What should be remembered on the MV4 Touch Operator Panel in order to prioritize the ″Print Report″ function while the ″Print Online Errors″ function is active ?

 
  • Click the question to obtain further information.

Which MI4 Operator Panels are approved by the Underwriters Laboratories (UL) and for the Canadian market (C UL) ?

 
  • You see table:

Is there a DEMO version for the MV4 Configurator (Galileo) ?

 
  • Yes, with clicks the question you reach the download.

What are the functional changes in the MV4-CFG-1-D/GB version V4.00.1 ?

 
  • See answer!

Can masks used on MV4-xxx and MI4-xxx touch panels burn the display if they are displayed continuously over a long period ?

 
  • Yes

How can data be transferred from a PS4 to another PLC system and displayed on an MV4 ?

 
  • Yes it is possible. Please click the question to obtain further information.

Can an MI4-140-KF1 (MI4 hand-held) be connected to an
Siemens S7-300 / S7-400 via MPI ?

 
  • Yes, MPI connections are supported.

How can Moeller PLCs be connected to SCADA or visualisation systems of other manufacturers ?

 
  • SCADA/visualisation systems with an OPC-Interface can be linked directly to a Moeller PLC using the S40-OPC server. Data transfer is implemented via RS232, modem or Ethernet TCP/IP.

Is it possible to display only the alarm text in an MI4 - project and suppress the red Alarm LED in the event of a fault ?

 
  • When creating the MI4 project in the MI4-CFG-1 software activate the following option:
    Project => Alarms => Message only

What is the minimum quantity available for customized seals for the MI4 devices ?

 
  • Please click on the question to obtain further information !

Which devices are available as a replacement of the MV4-590-TA1 and
MV4-590-TA2 ?

 
  • Please click on the question to obtain further information !

Which Touch Panel design software version (Galileo) is required for configuring the MV4-690-TBx device ?

 
  • Please click on the question to obtain further information !

Is the documentation for the MV4 Configuration Software AWB-C2700-1348D (Galileo, Galileo Runtime) also available in printed form?

 
  • Yes, but only in German Language. Order number: 255881

Some MI4 units have keys are labelled with letters. How can these keys be accessed in the Keyboard Macro Editor?

 
  • Please click on the question to obtain further information !

How is the integrated alphabetical keyboard used on some MI4 devices?

 
  • Please click on the question to obtain further information !

What information is required for determining the layout costs for customized seals (logos) for MI4 or MV4 devices ?

 
  • Please click on the question to obtain further information !

Is it possible to write a macro in the MI4 Keyboard Macro Editor that is only run if two or more keys are pressed simultaneously ?

 
  • Please click on the question to obtain further information !

Can different macros be assigned to the same key for MI4 ?

 
  • Please click on the question to obtain further information !

What is the final date of availability of Touch Panel VTP1- and VTP2 devices including accessories ?

 
  • The final date of availability of Touch Panel VTP1- and VTP2 devices including accessories is the december 2002.

Which MI4 operator and display units are no longer available?

 
  • Please click on the question to obtain further information!

Can event scripts for the MV4... (Galileo Software V 4.0) be started automatically or triggered by a bit?

 
  • Please click on the question to obtain further information!

 

 

 
.
 
 

 

 


Privacy Policy © 2007 by Moeller GmbH   Top