The DE4-NET-K network module cannot be used with DF4-120 frequency inverters. The module is used to connect the DF4-340 and DF4-341 frequency inverters directly to the Suconet K fieldbus.
There are two application modules with two-point controllers, three-point controllers, PID controllers and there is a closed-loop control toolbox for complex closed-loop control.
There are two connection cable:
1.
ZB4-255-KB1 for the connection between a GSM-Modem and a
converter ZB4-501-UM3/ZB4-501-UM4.
2.
ZB4-256-KB1 for the connection between a GSM-Modem and a PS4-200 series.
A new password must be defined. The preset password of the safety monitor is SIMON. After an application has been created, however, a new password that is different to SIMON must be defined in order to enable protection mode.
When a monitor is configured, it is assigned with the safety slaves required for the application. It does not matter whether these slaves are also used by another monitor.
The use of electronic devices for safety applications is permissible if the same level of safety is to be achieved as for conventional devices. For AS-Interface safety at work, this must be certified with the relevant test certificates.
moeller.com.au
Top